PROFI-5018/S CR ICP DAS Fieldbus Converters

The PROFI-5018 is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 10-channel Thermocouple Input Module with High Voltage Protection. Users can easily to choose and configure it by using the GSD file in any PROFIBUS Configurator.
PROFI-5018/S CR: PROFIBUS Remote I/O Module (10-Channel Thermocouple input) (ROHS). Include PROFI-5018 module and a DB-1820 daughter board
Protocol & Hierarchy: DP-V0 Slave
Supports PROFIBUS Transmission Rate (kbps): 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000
Transmission Rate Setting: detected automatically
Address Setting: Address 0~126 set by rotary switches or SSA Telegram
Indicators: PWR LED, RUN LED, ERR LED
I/O modules Configuration: Configured by GSD file
Network Isolation Protection: High Speed iCoupler
4KV ESD Protection: Contact for each terminal

Hardware

ESD Protection: 4 kV class B

PROFIBUS Interface

Controller: Siemens SPC3
Transceiver: ADI ADM2486
Connector: 9-pin female D-Sub
Baud Rate (bps): 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Transmission Distance (m): Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
Isolation: 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Protocol: DP-V0

LED

Round LED: PWR LED, RUN LED, ERR LED

POWER

Power supply: Unregulated +10 ~ +40 VDC
Protection: Reverse polarity protection, Over-voltage brown-out protection
Power Consumption: 3.5 W

Analog Input

Input Type:

• ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V
• +/-20mA, 0~20mA, 4~20mA (Requires Optional External 125 Ohm Resistor)
• Thermocouple (J, K, T, E, R, S, B, N, C)

Resolution: 16 bit
Accuracy: ±0.1% FSR
Sampling Rate: 10 Hz (Total)

Mechanism

Installation: DIN-Rail
Dimensions: 91 mm x 130 mm x 52 mm (W x L x H)

Environment

Operating Temp.: -25 ~ 75℃
Storage Temp.: -30 ~ 85℃
Humidity: 5 ~ 95% RH, non-condensing