LC-101/DIN CR
- Cost-effective for lighting control
- Power Relay Output
- Isolated AC Digital Input
- Tiny form-factor
- Low power consumption
INTRODUCTION
The LC-101 is an easy-to-use lighting control module that requires no specialist skills to install and operate, and no software is needed in order to control the DO channels.
The LC-101 provides 1 channel for digital input (photo couple isolation) and 1 channel for relay output. The output channel is form C type relay, while the input channel is based on a sink-type using a wire connection. The input channel can directly control the relay ON and OFF sequence without requiring a remote host controller. 4 kV ESD protection and 5000 Vrms intra-module isolation are also provided.
When required, communication with the LC-101 is programmable based on the Modbus RTU protocol, and an added benefit is that different addresses can be set for Modbus RTU communication via hardware configuration.
I/O SPECIFICATIONS
Digital Input
Input Channels: 1
Type: 90 ~ 240 VAC
On Voltage Level: 85 VAC
Off Voltage Level: 60 VAC
Input Impedance: 68 KΩ, 1 W
Isolation: 5000 Vrms
Function: Local and Remote Direct Control Relay ON/OFF and Remote Status Monitoring
Relay Output
Output Channels: 1
Type: Power Relay, Form C
Operating Voltage: 250 VAC or 30 VDC
Max. Load Current: NO: 10 A, NC: 6 A
Operating Time: 15 ms Max.
Release Time: 5 ms Max.
Electrical Life (Resistive load): 100,000 ops
Mechanical Life: 20,000,000 ops at no load (300 ops/minute)
Power-on Value: No
Safe Value: No
SYSTEM SPECIFICATIONS
Communication
Interface: RS-485
Format: N, 8, 1
Baud Rate: 1200 ~ 115200 bps
Protocol: Modbus RTU/DCON
Node Addresses: Hardware Configuration: 32 ~ 63 Software Configuration: 0~255 for DCON and 1~247 for Modbus RTU standard)
Connector: RJ-11(6P4C or 6P6C)
LED Display
Power: 1 LED as Power Indicator
EMS Protection
ESD (IEC 61000-4-2): ±2 kV Contact for Each Terminal
±4 kV Air for Random Point
EFT (IEC 61000-4-4): ±2 kV for Power
Power Requirements
Input Voltage Range: 10 ~ 30 VDC
Consumption: 0.5 W Max.
Connector: RJ-11
Mechanical
Dimensions (W x L x H): 52 mm x 98 mm x 27 mm
Installation: Screw Mounting
Environment
Operating Temperature: -25°C ~ +75°C
Storage Temperature: -30°C ~ +75°C
Humidity: 10 ~ 95% RH, Non-condensing