MSM-6226G
20-Port 10/100/1000Base-T + 4 TP/(100/1G) SFP Combo + 2 (100/1G) SFP L2 Plus Managed Switch (9-pin Female D-sub & RJ-45 cable, and Power Cord)
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet
- IEEE 802.3z Gigabit Ethernet
- L2+ features provide better manageability, security, QoS and performance
- Dual speed SFPs for FE or GbE fiber uplink
- IPv6 and s-Flow supports
- 802.3az Energy Efficient Ethernet standard
- Port Mirroring helps supervisor monitoring network
MSM-6226G is a L2 Managed Switch that meets all IEEE 802.3ab/u/x/z Gigabit, Gigabit Ethernet and Ethernet specifications. It provides 20 gigabit Ethernet ports (10/100/1000 Mbps TP) , 4 combo TP/SFP ports and 2 SFP ports.
The switch can be managed through RS-232 serial port via direct connection, or through Ethernet port using Telnet or Web-Based management unit, associated with SNMP agent. With the SNMP agent, the network administrator can logon the switch to monitor, confi gure and control each port activity in a friendly way. The overall network management is enhanced and the network efficiency is also improved to accommodate high bandwidth applications. In addition, the switch features comprehensive and useful function such as DHCP Option 82, QoS (Quality of Service), Spanning Tree, VLAN, Port Trunking, Bandwidth Control, Port Security, SNMP/RMON and IGMPv3 Snooping capability via the intelligent software. It is suitable for both Metro-LAN and office application.
The switch also supports the power saving to reduce the power consumption with Power Management technique. It could efficiently saving the switch power by auto detect the client idle and cable length.
Technology
Standards:
Port Mirroring helps supervisor monitoring network
IEEE802.1Q tag-base VLAN for performance
IEEE802.1X Access Control improve network security
IEEE802.1D Compatible, IEEE802.1w Rapid Spanning Tree & IEEE802.1s Multiple Spanning Tree
IEEE802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
IEEE802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3
Unknown Unicast/Broadcast/Multicast storm control
IP-MAC-Port binding for LAN security
QCL Based on Application traffic for QoS and rate limitation management
Support IGMPv3 snooping and IGMP Proxy
Support DHCP snooping (DHCP option 82)
ACL Based on Ethernet Type/ARP/IPv4 for packets permit or deny, rate limitation and port copy
Support "power saving" for Green Ethernet requirement
Support LLDP(Link Layer Discovery Protocol) provides a standards-based method for enabling switches to advertise themselves.
MAC Addresses: 8K
Processing Type: Store & forward
Memory Bandwidth: 52Gbps
Frame Buffer Memory: 4 Mbits
Protocol: VLAN, QoS, Port Trunk, SMTP, TELNET, SNMP, IGMP, IEEE802.1X, LLDP
Interface
RJ-45 Ports: 24 ports 10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
UTP/SFP Combo: 4-port combo 100/1000 Mbps SFP Fiber Module slots
SFP: 2 ports 100/1000 Mbps SFP Fiber Module slots
LED Indicators: POWER, TP Port LED, SFP Port LED
Ethernet Isolation: 2K Vdc Isolation
COM1: RS-232 (TxD, RxD and GND); Non-isolation
Frame Ground for EMS: EMS Requirements: IEC-61000-4-2, IEC 61000-4-3, IEC-61000-4-4, IEC-61000-4-5, IEC-61000-4-6, IEC-61000-4-8, IEC-61000-4-11
Power
Input Voltage Range: Voltage: +100 ~ +240 Vac
Power Consumption: 16 W
Frame Ground for EMS Protection: Yes
Mechanical
Casing: Metal
Environmental Rating: IP20
Dimensions: 442 mm x 170 mm x 44 mm (W x L x H)
Installation: Wall mounting, 19" rackmountable, brackets included
Environmental
Operating Temperature: 0 °C ~ 50 °C
Environmental Rating: -20 °C ~ 70 °C
Ambient Relative Humidity: 10 % ~ 90 % RH, non-condensig