PISO-DNS100U-D CR ICP DAS new

• DeviceNet Version: Volume I & II, Release 2.0
• Programmable slave MAC ID and baud rate
• Baud Rate: 125k, 250k, 500k bps
• Support Group 2 only Server
• I/O Operating Modes: Poll, Bit-Strobe, Change of State / Cyclic
• I/O Length: max 512 input bytes and 512output bytes per slave
• Slave Node: 10(max) nodes inside the board
• Not Support UCMM
• LED: Status , ERR

INTRODUCTION

The PISO-DNS100 has completed DeviceNet slave function according to DeviceNet Group 2 only server. With the built-in 80186 80M Hz CPU, this card can be applied in high transmission applications. The amazing function is that 10 slave nodes are implemented inside the PISO-DNS100. It supports up to 512 bytes of input & 512 bytes output data. DeviceNet Baud rate of 125-500 kbits/s & MACID can be set via utility setting. The PCI card also has an optically isolated DeviceNet interface.

APPLICATIONS

• Industrial Machinery
• Building Automation
• Medical
• Maritime
• Restaurant Appliances
• Laboratory Equipment & Research

SPECIFICATIONS

Bus Interface
Type: Universal PCI supports both 5 V and 3.3 V PCI bus
Board No.: By DIP switch
 
CAN Interface
Controller: NXP SJA1000T with 16 MHz clock

     Microprocessor inside with 80186 80MHz
 
Transceiver: NXP 82C250
Channel number: 1
Connector:9-pin male D-Sub (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+, N/A for others)
Baud Rate (bps): 125 k, 250 k, 500 k
Transmission Distance (m): Depend on baud rate (for example, max. 1000 m at 50 kbps )
Isolation: 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor: Jumper for 120 Ω terminator resistor
Specification: ISO-11898-2, CAN 2.0A and CAN 2.0B
Protocol: DeviceNet Volumn I ver2.0, Volumn II ver2.0
 
LED
Round LED: Status LED, ERR LED
 
Software
Driver: Windows 2K/XP
Library: VB 6.0, VC++ 6.0, BCB 6.0
 
Power
Power Consumption: 300 mA @ 5 V
 
Mechanism
Dimensions: 138mm x 22mm x 105mm (W x L x H)
 
Environment
Operating Temp.: 0 ~ 60 ℃
Storage Temp.: -20 ~ 70 ℃
Humidity: 5 ~ 85% RH, non-condensing