ZB-2550 CR ICP DAS new

• ISM 2.4 GHz operating frequency
• Fully compliant 2.4G IEEE802.15.4 / ZigBee specifications.
• Wireless transmission range up to 100 m(Line of sight).
• GUI configuration software (Windows version). Software Download
• DIN-Rail mount.

The ZB-2550/ZB-2551 is a RS-485/RS-232 to ZigBee Network converter. It enables RS-232/RS-485 devices to be wirelessly and easily connected to a new or existing system.
The ZB-2550 is net Host and the ZB-2551 is net Slave.It also supports various data formats and Baud Rates that can be configured via a Windows-based GUI utility. The ZB-2550 and the ZB-2551 can implement an ad-hoc, star or mesh network topology.
In some existing systems that use a RS-485/RS-232 network, it is sometimes difficult to extend the new devices due to building structure issues, wiring problems or other reasons. The ZB-2550 and the ZB-2551 can be easily added to an existing system in order to extend your network.
The typical transmission range of the ZB-2550/ZB-2551 converter is 100 m, and the ZB-2550P/ZB-2551P is 700 m.
ZigBee is a specification based on the IEEE 802.15.4 standard for wireless personal area networks (WPANs). ZigBee operates in the ISM radio bands, and it defines a general-purpose, inexpensive, self-organizing, mesh network for industrial control, embedded sensing, medical data collection, smoke and intruder warning, building automation and home automation, etc. There are three different types of ZigBee devices in a ZigBee network:

1. Coordinator (Master): Only one coordinator exists in each ZigBee network. Its function is to store information about the network and to determine the optimum transmission path between any two points of the network.

2. Full function device (Router, Repeater): Routers act as an intermediate repeater that passes data from other devices.

3. Reduced Function Device (End Device): This device contains a minimal amount of functionality to enable it to talk to its parent node (either the coordinator or a router); it cannot relay data directly from other devices.

Core

CPU: 8-bit microcontroller

Communication Interface

COM0: 
       RS-232 (TXD, RXD and GND);D-SUB9 Female, Non-isolation
       RS-485 (D+, D-; self-tuner ASIC inside); Non-isolation
LED Indicators: Power (Red), Zigbee Rx (Yellow), Zigbee Net State (Green)

COM 0 Settings

Baud Rate: 1200~115200 bps
Data Bit: 8
Parity Check: Even, Odd, None
Stop Bit: 1

Power

Protection: Power reverse polarity protection
EMS Protection: ESD,Surge, EFT
Required Supply Voltage: +10 to +30VDC
Power consumption: 0.5W
Connection: 5-Pin 5.08mm Removable Terminal Block

Dimensions

Case: Plastic
Flammability: UL 94V-0 materials
Dimensions: 33mm x 107mm x 78mm (W x H x D)
Installation: DIN-Rail

Operating Environment

Operating Temperature: -25°C to +75°C
Storage Temperature: -40°C to +80°C
Relative Humidity: 5% to 95% Non-condensing