IR-210 CR
Universal IR (Infrared) Learning Remote Module and Infrared to Modbus RTU Slave Converter with 6 IR channels. Comes with two CA-IR-SH2251 cables. (up to 176 IR commands). temperatures from -25° ~ +75°
- 6 IR output channels for controlling multiple devices.
- 1 IR learning input.
- Supports 6 learning IR carrier frequencies: 33、36、37、38、40 and 56 kHz.
- Can learn and store 224 IR commands.
- Supports RS-232 and RS-485 serial interface.
- Supports function code 0x06/0x10 of Modbus/RTU protocol to emit IR commands.
- Assignable 256 Modbus Network IDs.
- Baud rate settings: 9600, 19200, 38400, 57600 and 115200 bps.
- Configurable NONE / ODD / EVEN parity and 1 or 2 stop bits.
- Provides transmitting / learning / power indication LEDs.
- Built-in Watchdog.
- RoHS Compliance.
- Provides API library for users' program development easily
introduction
IR-210 is a universal IR learning remote module which can learn IR remote commands of diverse electronic devices. The learning commands can be stored in the module or saved to a file. IR-210 supplies 6 IR output channels for individual or simultaneous control on multiple devices. The accompanied RS-232 and RS-485 interfaces with Modbus/RTU protocol provide flexible expansion and control on the module. Besides, IR-210 software utility provides users with easy configuration, learning, test and storage of IR commands. As a replacement of IR remote controls and a module that can be easily integrated with Modbus master devices (e.g. PAC, PLC, PC… etc.), IR-210 is well-suited for smart home and building automation.
hardware specifications
IR Interface
IR Output Channels: 6 channels with 3.5 mm audio jack
IR Learning Input: 1 channel. Supports 6 IR carrier frequencies: 32.768, 36, 37.037, 38, 40, 56 kHz.
Serial Communication Interface
Connector: 2-pin (RS-485) / 5-pin (RS-232, Power) screw terminal connecter
COM1: RS-232 (TxD, RxD, GND)
COM2: RS-485 (DATA+, DATA-)
Baud Rate: 9600, 19200, 38400, 57600, 115200 bps
Protocol: Modbus/RTU (slave)
LED Indicator
Round LED: TR (IR Transmitting) / LN (IR Learning) / PWR (Power)
Power
Power supply: +10 ~ +30 VDC
Power Consumption: Stand by: 0.65 W
1 IR output used: 2.5 W
6 IR outputs used: 12 W (Max.)
Mechanism
Installation: DIN-Rail Mounting
Dimensions: 33 mm x 107 mm x 78 mm (W x H x L)
Dip Switch: FW (Firmware update mode) / OP (Firmware operation mode)
Environment
Operating Temp.: -25 ~ +75℃
Storage Temp.: -30 ~ +80℃
Humidity: 10 ~ 90% RH, non-condensing