Benvenuti sulla nostra nuova piattaforma ICP DAS
Che sostituisce industrialtech.it

PCM-CAN200P-D CR ICP DAS new

PCM-CAN200P-D CR ICP DAS

PCM-CAN200P-D CR ICP DAS

PCM-CAN200P-D CR

2-Port Isolated Protection CAN Communication PC-104+ Module with 9-pin D-sub connector (RoHS)

Price

€ 309,16

(VAT excluded)

€ 377,18(VAT included)

Prezzo di 1 pz. iva (22%) inclusa: € 377,18

Availability: Not Available

SKU: 4667

Model: PCM-CAN200P-D CR

Need Help?


  • PCI104/PC104+ compliant
  • 9-pin D-sub connector
  • Compatible with CAN 2.0 parts A and B
  • Fully compatible with ISO 11898-2 standard
  • Support CAN bard from 10K to 1M bps
  • 2500 Vrms photo couple isolation on the CAN bus
  • Built-in jumper to select 120 ohm terminal resister
  • 1KV galvanic isolation
  • 1/2 independent CAN channels
  • Direct memory mapping to the CAN controller

INTRODUCTION

PCM-CAN100/200-D can represent a CAN solution on a high quality PCI104/PC104+ hardware in industrial environment compliant with CAN 2.0A and CAN 2.0B specification. It has 2 independent CAN bus communication ports with 9-pin D-sub connector, and has the ability to cover a wide range of CAN applications.
 
Besides, PCM-CAN100/200-D uses the CAN controller Phillips SJA1000T and transceiver 82C250/251, which provide bus arbitration, error detection with auto correction and re-transmission function. It can be installed in a 5V PCI slot and supported truly “Plug & play”

APPLICATIONS

  • CAN bus communication application
  • DeviceNet, CANopen, CAN J1939, SDS(System Wide Network) protocol application
  • Control System
  • Building Automation
  • Factory Automation
  • Distributed data acquisition

HARDWARE SPECIFICATIONS

Bus Interface
Type: PC-104+
 
CAN Interface
Controller: NXP SJA1000T with 16 MHz clock
Transceiver: NXP 82C250
Channel number: 2
Connector: 9-pin male D-Sub (CAN_L, CAN_SHLD, CAN_H, N/A for others)
Baud Rate (bps): 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate)
Isolation: 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor: Jumper for 120 Ω terminator resistor
 
Power
Power Consumption: 250 mA @ 5 V
 
Software
Driver: Windows XP/7/8/10 (32-bit/64-bit OS), Linux 2.6.x ~ 4.8.0, LabView, DASYLab, InduSoft
Library: VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0
 
Mechanism
Dimensions: 91mm x 22mm x 96mm (W x L x H)
 
Environment
Operating Temp.: 0 ~ 60 ℃
Storage Temp.: -20 ~ 70 ℃
Humidity: 5 ~ 85% RH, non-condensing

Disclaimer