WISE-7117 ICP DAS new

• Built-in Web Server for IF-THEN-ELSE rule setting
• Built-in IF-THEN-ELSE rule enigne for logic operation
• No more programming. Just click and get done!
• Support IO, Counter, Timer, Email operations
• Modbus/TCP Protocol for SCADA Software Seamless Integration
• IEEE 802.3af-compliant Power over Ethernet (PoE)
• 10/100 Base-TX Ethernet
• AI Type: 8 Differential (mV, V, mA)
• DO Type: 4 Open Collector Outputs
• Over Voltage Protection is up to 240 Vrms
• 2-way Isolation/ESD Protection

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development. WISE-7117 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7117 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc. This multi-function WISE-7117 module supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 8-channel differential analog inputs and 4-channel digital ouputs. Each analog channel is allowed to configure an individual range and has 240Vrms high over voltage protection. Jumper selectable for voltage or current input.

Analog Input

Input Channels: 8 (Differential)
Input Type: +/-150 mV, +/-500 mV, +/-1V, +/-5V, +/-10V
(jumper selectable): +/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA
Resolution: 16-bit
Sampling Rate: 10 Sample/Sec. (Total)
Accuracy: +/-0.1%
Zero Drift: +/-20 μV/°C
Span Drift: +/-25 ppm/°C
Overvoltage Protection: 240 Vrms
Input Impedance Voltage: 2 MΩ
Current 125 MΩ
Common Mode Rejection: 86 dB Min.
Normal Mode Rejection: 100 dB
Individual Channel Configuration: Yes

Digital Output

Output Channels: 4
Output Type Isolated Open Collector: (Sink)
Max. Load Current: 700 mA/Channel
Load Voltage: +5 VDC ~ +50 VDC
Overvoltage Protection: 60 VDC
Overload Protection: 1.4 A
Short-circuit Protection: Yes

System

CPU: 16-bit CPU
SRAM: 512KB
Flash Memory: 512KB
EEPROM: 16KB
Watchdog: Yes

Communication

PoE Ethernet Port
10/100 Base-TX and automatic MDI/MDI-X

2-Way Isolation

I/O 2500 VDC

EMS Protection

ESD (IEC 61000-4-2): 4 kV Contact for each terminal and 8 kV
Air for random point
EFT (IEC 61000-4-4): +/-4 kV for Power

LED Indicators

PoE Power PoE: On
L1: System Running
L2: Ethernet Link/Act
L3: Ethernet 10/100 M Speed

Power Requirements

Reverse Polarity Protection: Yes
Powered from Terminal Block: Yes, 12 ~ 48 VDC
Powered from PoE: Yes, IEEE 802.3af, Class1
Consumption: 3.1 W

Mechanical

Dimensions (W x L x D): 72 mm x 123 mm x 35 mm
Installation: DIN-Rail or Wall mounting

Environment

Operating Temperature: -25 °C ~ +75 °C
Storage Temperature: -30 °C ~ +80 °C
Humidity: 10 ~ 90% RH, non-condensing

Functions

Rule Configuration Website: Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules: 
       3 IF conditions with AND or OR operators
       3 THEN actions and 3 ELSE actions
48 Internal Registers: Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers: Delay / Timing functions.
12 Emails: Send Email messages to pre-set Email receivers.
12 CGI Commands: Send pre-set CGI commands.
12 Recipes: Set up THEN/ELSE action groups.
8 P2P remote modules: Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol: Real time control and monitoring I/O channels and system status of controllers via SCADA software.

IF Conditions

AI Channel - Internal Register: =、>、<、>=、<=(value)
DO Counter: =、>、<、>=、<=(value)、Change
Timer: Timeout、Not Timeout
P2P: DI、AI、DI counter、DO counter、IR
Rule Status: Enable、Disable

THEN / ELSE Actions

DO Channel: ON、OFF、Pulse Output
Internal - Register: Change the value
DO Counter: Reset
Timer: Start、Stop
Email - CGI Commands: Send
Recipe: Execute
P2:  DO(On/Off)、AO、IR
Rule Status: Enable、Disable