I-7550-G CR
PROFIBUS to RS-232/422/485 Converter
- Protocol & Hierarchy: DP-V0 Slave
- Supports PROFIBUS Transmission Rate (Kbps): 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000
- Transmission Rate Setting: detected automatically
- Max Input Data Length: 128 Bytes
- Max Output Data Length: 128 Bytes
- Address Setting: 0~126 set by DIP switch
- Hybrid COM 1: RS-232/422/485 with “Self Tuner” inside
- Supports COM 1 Baudrate (Kbps): 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, 115.2
- Supports COM 1 Data Format: 7/8 data bits, No/Odd/Even parity, 1 stop bit
- Indicators: PWR, ERR, and RUN LEDs
- Network Isolation Protection: High Speed iCoupler
- DC Isolation Protection: 3000VDC on PROFIBUS side
The I-7550 converter is specially designed for the slave device of PROFIBUS DP protocol. It offers RS-232, RS-422, and RS-485 three kinds of communication way. With the Hybrid COM 1 design, users can readily choose one type of com port to use. By using this module, users can put their RS-232/422/485 devices into PROFIBUS network very easily.
Hardware
CPU: 80186, 80 MHz or compatible
SRAM/Flash/EEPROM: 512 KB / 512 KB / 16 KB
Watchdog:
Watchdog IC
CPU built-in
ESD Protection: 4 kV class A
Interface
Controller: Siemens SPC3
Transceiver: ADI ADM2486
Connector: 9-pin female D-Sub
Baud Rate (bps): 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Transmission Distance (m): Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
Isolation: 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Protocol: DP-V0
UART Interface
COM: RS-232/RS-422/RS-485(can’t be used simultaneously)
COM Connector:
3-pin screwed terminal block (RxD, TxD, GND)
4-pin screwed terminal block (RxD+, RxD-, TxD+, TxD-)
2-pin screwed terminal block (DATA+, DATA-)
Baud Rate (bps): 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Data bit: 7, 8
Stop bit: 1
Parity: None, Even, Odd
LED
Round LED: PWR LED, RUN LED, ERR LED
Power
Power supply: Unregulated +10 ~ +30 VDC
Protection: Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption: 2.5W
Mechanism
Installation: DIN-Rail
Dimensions: 72 mm x 33 mm x 119 mm (W x L x H)
Environment
Operating Temp: -25 ~ 75℃
Storage Temp: -30 ~ 85℃
Humidity: 5 ~ 95% RH, non-condensing