FR-2053TA
16-channel isolated digital input module with 20-pin screw terminal connector
- Built-in Wire-saving FRnet DI/DO control
- High-speed transmission reliability
- Simple synchronization mechanism
- No software overhead on protocol processing
- Supporting broadcasting (1:n data transmission)
- Duplicating output easily
- Fixed I/O scan-time and I/O synchronization
- DIN-Rail mountable
The FR-2053TA/FR-2053HTA has 16-channel isolated Sink/Source input, while the FR-2057TA has 16-channel isolated source output. The FR-2000 I/O module has an FRnet interface. The users can daisy chain several FR-2000 modules together. Via FRnet, the FR-2000 modules can extend the remote I/O control of PC, PAC and PLC easily. Further information about the networking of FR-2053TA/2057TA; refer to literature related to I-7188EF, I-8172W, FRB-100/200U.
Digital Input
Input Channel: 16 (Sink/Source)
Input Type: Isolation, One Common for All Digital Inputs
On Voltage Level: +3.5 ~ +30 VDC
Off Voltage Level: +1 VDC Max.
Input Impedance: 3 kOhm
Isolation Voltage: 3750 Vrms
Interface
2-wire cabling:
2-wire cabling Belden 9841 (2P twisted-pair cable),
When different cables are used, the transmission distance may change
Transfer distance:
Max. 400m for FR-2053TA
Max. 100m for FR-2053HTA
LED Indicators: Power, Communication Run, Communication Error, Terminal resistor, Digital input
Transfer speed:
250 kbps for FR-2053TA
1 Mbps for FR-2053HTA
Cyclic scan time:
2.88ms for FR-2053TA
0.72ms for FR-2053HTA
Connection: Removable 20-pin Terminal Block
Power
Input Voltage Range: +10 ~ +30 VDC (Non-isolation)
Power consumption: 2.4 W Max.
Protection: Power reverse polarity protection
Frame Ground for EMS Protection: Yes
Connection: 5-Pin Removable Terminal Block
Mechanical
Casing: Plastic (Flammability UL 94V-0)
Dimensions (W x L x H): 33 mm x 102 mm x 110 mm
Installation: DIN-Rail
Mechanical
Operating Temperature: -25°C ~ +75°C
Storage Temperature: -30°C ~ +85°C
Ambient Relative Humidity: 10% ~ 90% RH, non-condensing