DIO-64/3 CR
ISA Bus, 32-ch Digital input, 32-ch Digital output, 3x Timer/Counter Board
- 32 digital input lines
- Buffer output for higher driving capability
- 3 independent programmable 16 bit down counter
- One 16-bit counter , one 32 bit counter with a 4 MHz time base
- Breadboard area for add-on circuit
- Backward compatible to 720 series card
The DIO-64 provides 32 digital input channels , 32 output channels and 6 counter/timer channels The DIO-64 consists of two 16-bit input port and two 16-bit output port . The user can use the DB-16P ( or 782 series ) to. Connect the input port (CN2,CN4) for isolation purpose. The user can use DB-16R (or 785 series) to interface to the output port (CN1,CN3) for relay control. There are four clock source , 2 M , 1 M , 500 k , 250 k, on the board . The user can choose any one by jumper setting .The user can take the frequency from the soldering pad. On board Timer/Counter provides 3-channel for frequency measure , event counting and pulse generation. The optional 8254 provides 3-channel for interrupt use.
Digital Input
Channels: 32
Compatibility: 5 V/TTL
Input Voltage:
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Response Speed: 1.0 MHz (Typical)
Digital Output
Channels: 32
Compatibility: 5 V/TTL
Output Voltage:
Logic 0: 0.4 V max.
Logic 1: 2.4 V min.
Output Capability:
Sink: 0.8 mA @ 0.8 V
Source: -2.4 mA @ 2.0 V
Response Speed: 1.0 MHz (Typical)
Timer/Counter
Channels: 3 independent
Resolution: 16-bit
Input Frequency: 10 MHz max.
Clock Source: 250 kHz/500 kHz/1 MHz/2 MHz
Reference Clock: Internal: 4 MHz
General
Bus Type: ISA
I/O Connector: 20-pin box header x 5
Dimensions (L x W x D): 93 mm x 135 mm x 22 mm
Power Consumption: 500 mA @ +5 V
Operating Temperature: 0 ~ 60 °C
Storage Temperature: -20 ~ 70 °C
Humidity: 5 ~ 85% RH, non-condensing