Benvenuti sulla nostra nuova piattaforma ICP DAS
Che sostituisce industrialtech.it

PISO-CPM100-D ICP DAS new

PISO-CPM100-D ICP DAS

PISO-CPM100-D ICP DAS

PISO-CPM100-D

Standalone intelligent CANopen  Communication Board   with D-Sub 9 pin connector

Price

€ 343,75

(VAT excluded)

€ 419,38(VAT included)

Prezzo di 1 pz. iva (22%) inclusa: € 419,38

Availability: Not Available

SKU: 3652

Model: PISO-CPM100-D

Need Help?


  • Compliant with CiA DSP-402 v1.1

  • Reduce 50% wires connection cost

  • Physical layer with fault tolerance and anti-noise

  • Support max. 127 motors in one network

  • Absolute and relative position control

  • Velocity control

  • Torque control

  • JOG control

  • Support max. 127 motors synchronous action

  • Various Homing control

  • Support torque limitation with CANopen command

  • Support Win 2000/XP/Vista or Win 7(32-bit version)

 
The PISO-CPM100 gives a very powerful and economic solution of an active CANopen master device with one CAN channel. It uses the NXP SJA1000T and 82C250 to be the CAN controller and transceiver, which provide bus arbitration, error detection with auto correction and re-transmission function. The 16-bit on-board microcontroller with real-time O.S., MiniOS7, allows many features, such as real-time message transmission and reception, filtering, preprocessing, and storage of CAN messages. Under the effect of the powerful microcontroller, this card can be made for one CAN controller manager without losing data, even in systems with a high PCI bus load. Therefore, the CANopen critical process can be implemented directly by CANopen firmware in the PISO-CPM100. In addition, users can develop their CANopen application by using the CANopen library on the host computer. When the PISO-CPM100 is active, the data exchange between users’ application and CANopen firmware is performed via the memory mapping method of the PISO-CPM100.

APPLICATIONS

- Industrial Machinery
- Building Automation   
- Medical    
- Maritime    
- Restaurant Appliances  
- Laboratory Equipment & Research


FIRMWARE FUTURES

- One CANopen master communication port
- Standard CANopen specification DS-301 v4.02
- Support node id 1 ~ 127
- Programmable bauds:10 K, 20 K, 50 K, 125 K, 250 K, 500 K, 800 K, and 1M bps
- Scan function for scanning all nodes on the same CANopen network
- Provide master listen mode for monitoring without bothering the CANopen network
- Support both Node Guarding Protocol and Heartbeat Consumer Protocol
- Provide event trigger function for EMCY event, Node Guarding event and Heartbeat event
- Provide Event-triggered, remote-requested, cyclic and acyclic SYNC of PDO mode
- The PDO communication supports single byte output so that users can just modify the value of one byte without changing the others
- Allow dynamic PDO mapping
- Allow to get several PDO data simultaneously
- The SDO communication supports segment protocol
- Programmable master node ID for the CANopen slave function
- Support EDS file
- Allow the automatic adding the node while it boots up
- Support multi-master architecture
- CPMUtility utility tool for testing users' CANopen network
- Provide VC++,VB.Net, and C# (2005) demos and function libraries


DRIVER SUPPORT

Development Toolkit for Windows NT4.0
Development Toolkit for Windows 98/ME
Development Toolkit for Windows 2000/XP
 

SOFTWARE UTILITY FEATURES

The software utility can easily to access the I/O data of all the slave devices. The users can monitor the input data of the specific slave device and change the output data to the remote slave device with this utility
Auto-scan all the CANopen master devices that the CPMUtility has supported
Auto-scan all the CANopen slave devices on the CANopen network
Support EDS file
Dynamic PDO object setting easily
Guarding Event and Heartbeat Event detection
EMCY message receiving
Maximum 5 SYNC message producers per CANopen master
Support PISO-CPM100(U), I-8123W, I-7565-CPM for version 2.00 later
Support OS: WinCE5.0, and Win2K/XP/Vista/7 with 32-bit system
 

HARDWARE

CPU - 80186, 80 MHz or compatible
SRAM/Flash/EEPROM - 512 KB / 512 KB / 2 KB


Bus Interface

Type - PCI bus, 5 V, 33 MHz, 32-bit, plug and play.
Board No - By DIP switch


CAN Interface

Controller - NXP SJA1000T with 16 MHz clock
Transceiver - NXP 82C250
Channel number - 1
Connector - 9-pin male D-Sub (CAN_L, CAN_SHLD, CAN_H, N/A for others)
Baud Rate (bps) - 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M
Transmission Distance (m) - Depend on baud rate (for example, max. 1000 m at 50 kbps )
Isolation - 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor - Jumper for 120 Ω terminator resistor
Specification - ISO-11898-2, CAN 2.0A and CAN 2.0B
Protocol - CANopen DS-301 ver4.02


LED

Round LED - Green LED, Red LED


Software

Driver - Windows 98/ME/NT/2K/XP
Library  - VB 6.0, VC++ 6.0, BCB 6.0


Power

Power supply - Unregulated +10 ~ +30 VDC
Power Consumption - 300 mA @ 5 V


Mechanism

Dimensions - 127mm x 22mm x 121mm (W x L x H)


Environment

Operating Temp. - 0 ~ 60 ℃
Storage Temp. - -20 ~ 80 ℃
Humidity - 0 ~ 95% RH, non-condensing

Disclaimer