Benvenuti sulla nostra nuova piattaforma ICP DAS
Che sostituisce industrialtech.it

PISO-CM200U-T ICP DAS new

PISO-CM200U-T ICP DAS

PISO-CM200U-T ICP DAS

PISO-CM200U-T

Intelligent CAN interface with two Isolated Protection CAN Communication Port and 5-Pin Screw Terminal Connector for Universal PCI bus systems

Price

€ 603,05

(VAT excluded)

€ 735,72(VAT included)

Prezzo di 1 pz. iva (22%) inclusa: € 735,72

Availability: Not Available

SKU: 110667

Model: PISO-CM200U-T

Need Help?


  • Embedded 32-bit microprocessor
  • NXP 82C250 CAN transceiver
  • Bosch C_CAN controller
  • Supports both CAN 2.0A and CAN 2.0B specifications
  • Storage Timestamp with a precision of at least ±1 ms
  • Board number selectable via DIP switch
  • Dual port RAM communication mechanism
  • Embedded RTC (real time clock)
  • Transmission/reception buffer for up to 256 CAN messages
  • Allows a maximum of 5 sets of cyclic transmission messages
  • Cyclic transmission message precision: ±1ms
  • Easy to update firmware

 
A Controller Area Network (CAN) is a serial communication system based on the CAN protocol that enables efficient distributed real-time control combined with a very high level of security. The CAN protocol is especially suited for structuring "intelligent" device networks, as well as for building automatic control environments that contain sensors and actuators within a system or sub-system. In a CAN network, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted.
 
The PISO-CM200U is a very powerful and economic solution for an active CAN board, containing two CAN channels that cover a wide range of CAN applications. The 32-bit on-board microcontroller allows the filtering, pre-processing, and storage of CAN messages (with a timestamp), as well as real-time transmission of CAN messages, among many other features.
 
An added benefit is that custom CAN Bus applications can be developed using the PISO-CM200U library. When the PISO-CM200U is active, data exchange between the custom application and the CAN Bus firmware is performed via the memory mapping method on the PISO-CM200U.

Hardware specifications

Hardware
CPU: 32-bit MCU
DPRAM: 16 KB
RTC (Real Time Clock): Yes
 
Bus Interface
Type: Universal PCI, 5 V, 33 MHz, 32-bit, plug and play
Board No.: Configurable via DIP switch
 
CAN Interface
Controller: Bosch C_CAN
Transceiver: NXP 82C250
Channel number: 2
Connector: 5-pin screw terminal block
Baud Rate (bps): 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (user-defined Baud Rate allowed)
Isolation: 3000 VDC for DC-to-DC, 3000 Vrms for photo-couple
Terminator Resistor: Jumper for 120 Ω terminator resistor
 
LED Indicators/Display
System LED Indicators: Yes, two (round) as Communication Indicators, Rx/Tx, ERR
 
Power
Power Consumption: 800 mA @ 5 V
 
Software
Driver: Windows XP/7/8.1/10 (32-bit/64-bit) OS
Library/Demo Languages: C#.Net, VB.Net, VC++.Net
 
Mechanism
Dimensions (L x W x D): 150 mm x 121 mm x 22 mm

Environment

Operating Temp.: 0 to 60℃
Storage Temp.: -20 to 70℃
Humidity: 5 to 85% RH, Non-condensing

Disclaimer