PET-7224 CR
PoE Ethernet I/O Module with 2-port Ethernet Switch, 4-ch Analog output, 5-ch Digital input and 5-ch Digital output
The ET-7024/PET-7024/ET-7224/PET-7224 is a multifunction module includes 4 channels analog output, 5 channels digital input and 5 channels digital output. It provides a variety of programmable analog output options (+/-5 V, +/-10 V, 0 ~ 20 mA and 4 ~ 20 mA), and each analog output can be programmed to accept either current or voltage as output depending upon the position of corresponding jumper. The ET-7024/PET-7024/ET-7224/PET-7224 is fully RoHS compliant and provides 4 kV ESD protection as well as 2500 VDC intra-module isolation.
PET-7224 CR: PoE Ethernet I/O Module with 2-port Ethernet Switch, with 4-channels AO, 5-channels DI and 5-channels DO (RoHS)
- Built-in Web Server
- Web HMI
- Support for both Modbus TCP and Modbus UDP Protocols
- Communication Security
- Dual Watchdog
- Wide Operating Temperature Range:
- I/O Pair Connection
- Built-in I/O
- AO: 4 Channels
- DI/Counter: 5 Channels
- DO: 5 Channels
Software
Built-In Web Server: Yes
Web HMI: Yes
I/O Pair Connection: Yes
Communication
Ethernet Port: 2 x RJ-45, 10/100 Base-TX, Swtich Ports
PoE: Yes
Protocol: Modbus/TCP, Modbus/UDP
Security: ID, Password and IP Filter
Dual Watchdog: Yes, Module (0.8 second), Communication (Programmable)
LED Indicators
for System Running: Yes
for Ethernet Link/Act: Yes
for DI/DO status: Yes
for PoE Power: Yes
2-Way Isolation
Ethernet: --
I/O: 2500 VDC
EMS Protection
ESD (IEC 61000-4-2): ±4 kV Contact for Each Terminal and ±8 kV Air for Random Point
EFT (IEC 61000-4-4): ±4 kV for Power Line
Surge (IEC 61000-4-5): ±2 kV for Power Line
Power Requirements
Reverse Polarity Protection: Yes
Powered from Terminal Block: 12 ~ 48 VDC
Powered from PoE: Yes, IEEE 802.3af, Class1
Consumption: 5.5 W (Max.)
Mechanical
Dimensions (W x L x H): 76 mm x 120 mm x 38 mm
Installation: DIN-Rail or Wall mounting
Environmental
Operating Temperature: -25 ~ +75°C
Storage Temperature: -30 ~ +80°C
Humidity: 10 ~ 90% RH, Non-condensing
I/O Specifications
Analog Output
Channels: 4
Type: +0 VDC ~ +5 VDC, +/-5 VDC, +0 VDC ~ +10 VDC, +/-10 VDC,+0 mA ~ +20 mA, +4 mA ~ +20 mA (Jumper Selectable)
Individual Channel Configuration: Yes
Resolution: 12-bit
Accuracy: +/-0.1% of FSR
Voltage Output Capability: 10 V @ 20 mA
Current Load Resistance: 500 Ω
Open Wire Detection: Yes, for 4 ~ 20 mA only
Power-on Value: Yes, Programmable
Safe Value: Yes, Programmable
Digital Input/Counter
Channels: 5
Dry Contact (Source):
- On Voltage Level: Close to GND
- Off Voltage Level: Open
- Effective Distance for Dry Contact: 500 Meters Max.
Wet contact (Sink Source): On Voltage Level: +1 VDC Max. ; Off Voltage Level: +3.5 VDC ~ +30 VDC
Input Impedance: -
Counters:
- Channels: 5
- Max. Count: 4,294,967,295 (32-bit)
- Max. Input Frequency: 100 Hz
- Min. Pulse Width: 5 ms
Overvoltage Protection: 30 VDC
Digital Output
Channels: 5
Type: Isolated Open Collector
Sink/Source (NPN/PNP): Sink
Max. Load Current: 600 mA/Channel
Load Voltage: +5 VDC ~ +50 VDC
Overvoltage Protection: 60 VDC
Overload Protection: 1.4 A
Short-circuit Protection: Yes
Power-on Value: Yes, Programmable
Safe Value: Yes, Programmable