tM-7530 CR
Intelligent tiny RS-232/CAN Converter. 9-pin female D-Sub. 1W power consumption, DIN-Rail mountable. Has operating temperatures of -25°C ~ +75°C
ICP DAS has provided a lot of UART/CAN product solutions which are widely recommended in the market. These UART/CAN converters can help users to implement the communication between RS-232 and CAN network. In order to cater for costing requirement, we provide a new solution of RS-232/CAN converter-tM-7530. The tM-7530 is a tiny RS-232/CAN to fit narrower environment as a result of its small size. It has isolation on power side and on CAN bus side and its performance is faster than other RS-232/CAN module. The function of tM-7530 can full compatibly with I-7530 and I-7530T. Besides, it provides new function such as listen only. User can use this function to listen CAN bus messages and error detection. According to above features, tM-7530 is an economical and practical RS-232/CAN converter solution.
Moreover, we expand the functionalities of tM-7530 for some special application. In pair connection mode, tM-7530 can be used to connect PC with other RS-232 devices at the same time. The application architecture may be as follows.
tM-7530 CR: Intelligent tiny RS-232/CAN converter (RoHS)
- Compatible with CAN specification 2.0A and 2.0B
- Fully compatible with ISO 11898-2 standard
- Support various CAN baud rate from 10K bps to 1M bps
- Support user-defined CAN baud rate
- Support various RS-232 baud rate from 110 bps to 230400 bps
- External option 120 Ω terminator resistor
- Software configurable CAN and RS-232 communication parameters
- Power, data flow and error indicator for CAN and RS-232
- Watchdog inside
- Support pair connection mode
- Software buffer on CAN bus side and RS-232 side
- Support user-defined end of characters on pair connection mode
- Support listen only mode
- Support time stamp response on RS-232 side
CAN Interface
Transceiver: NXP TJA1042
Channel number: 1
Connector: Spring type connector
Baud Rate (bps): 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 Mbps (allow user-defined CAN baud rate)
Isolation: 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor: External option terminator resistor
Specification: ISO-11898-2, CAN 2.0A and CAN 2.0B
RS-232 Interface
Connector: 9-pin female D-Sub (TxD, RxD, GND, N/A for others)
Baud Rate (bps): 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400
Data bit: 5, 6, 7, 8
Stop bit: 1, 2
Parity bit: None, Even, Odd
LED
Round LED: ON LED: Power and Data Flow; ERR LED: Error Status
Power
Protection: Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption: 1W
Mechanism
Installation: DIN-Rail
Dimensions: 52mm x 86mm x 32mm (W x L x H)
Environment
Operating Temp.: -25 ~ 75 ℃
Storage Temp.: -30 ~ 80 ℃
Humidity: 10 ~ 90% RH, non-condensing