CAN-2019C/S ICP DAS new

CAN-2019C module follows the CiA-301 version 4.02 and CiA-401 version 2.1. You can access the digital I/O status and set the configuration by using standard CANopen protocol. CAN-2019C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file. CAN-2019C is a 10-channel universal analog input CANoper slave module. It provides extremely accurate thermocouple measurement and automatically cold-junction compensation for each channel. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirement. 

• NMT: Slave
• Provide Pair-Connect function
• Provide default EDS file
• ESD Protection 4KV Contact for each channel
• Support Power supply 10~30Vdc
• Support CiA-301 v4.02, CiA-401 v2.1
• Support PDO Mapping

Can Interface

Connector: 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
Baud Rate (bps): 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M
Terminator Resistor: Switch for 120 Ω terminator resistor
Node ID: 1~99 selected by rotary switch
Protocol: CANopen CiA-301 ver4.02, CiA-401 ver2.1
No. of PDOs: 10 Rx, Tx (Support Dynamic PDO)
PDO Mode: Event Triggered, Remotely requested, Cyclic and acyclic SYNC
Error Control: Node Guarding protocol and Hearbeat Producer protocol
Emergency Message: Yes

Analog Input

Input Channels: 10 (differential) 
Input Type: +/- 15 mV, +/- 50 mV, +/-100 mV, +/-500 mV, +/-1 V, +/- 20mA ( Optional External 125Ω resistor required)
Resolution: 16-bit
Accuracy: +/-0.1% FSR
ESD protection: 4kV contact for each channel

LED

Round LED: PWR LED, RUN LED, ERR LED

Power

Input range: Unregulated +10 ~ +30 VDC
Power Consumption: 1.5 W

Mechanism

Installation: DIN-Rail
Dimensions: 33 mm x 99 mm x 78 mm ( W x L x H )

Environment

Operating Temp: -25 ~ 75 ℃
Storage Temp: -30 ~ 80 ℃
Humidity: 10 ~ 90% RH, non-condensing