PMC-5151-EN CR
Web-based Power Meter Concentrator (English) (Plastic Case)
The PMC-5151 is a web-based intelligent Power Meter Concentrator developed by ICP DAS. It offers webpage interface, and features various functions such as: power data collection, logic control, power demand management, data logger and alarm notification functions.PMC-5151 allows connections to ICP DAS Smart Power Meters via RS-485 or Ethernet interface to read the power data of the devices measured by the power meters; and then real-time record the power values in the data logger file. It also provides data logger file auto send-back function; together with PMC Data Server software or SCADA software, it allows collection and analysis of the power data.
PMC-5151 is equipped with built-in Web Server that allows direct connections via browsers to the PMC-5151 for viewing power data and setting up the system parameters. It also offers Modbus TCP/RTU Slave function that allows SCADA software or HMI devices to connect to PMC-5151 to get real-time power data of the devices via Modbus TCP/RTU protocol.
In addition to ICP DAS XW-Board and M-7000 I/O modules, the PMC-5151 can also connect to standard Modbus TCP/RTU Slave modules. By working with the I/O modules, and functions such as IF-THEN-ELSE logic rule execution and alarm notification functions including Email/SMS/SNMP Trap, PMC-5151 offers more thought-out power demand management and alarm notification functions, and is able to perform load shedding of the devices if required, and enables real-time monitoring and control of the power consumption of the devices.
PMC-5151-EN CR: Power Meter Concentrator ( English ) (RoHS)
- No extra software tool is required, using browsers to perform system operations
- Support at most 24 ICP DAS Modbus Power Meters and 8 Modbus I/O modules
- (COM2, COM3 and LAN interface can connect to Max. 16 power meters individually)
- Display real-time or historical power data (in data table or chart form)
- Provide power data statistics report (Daily and Monthly report)
- Data file auto send-back & recovery when network is resumed after disconnection
- Built-in IF-THEN-ELSE logic engine for thought-out power demand management
- Provide alarm message notification function via Email or SMS (for SMS message sending, GTM-203M-3GWA is required)
- Adjust device operations by its power status via Modbus I/O modules
- Provide Schedule function for operations of I/O modules (devices)
- Support Modbus TCP/RTU Slave protocol for seamless integration with SCADA
- Support Standard SNMP Protocol
- With PMC Data Server software, allow importing the power data into database
System Software
OS: Windows CE OS
Embedded Service: PMC Runtime, Web server, FTP server
CPU Module
CPU: 32-bit ARM CPU
SDRAM: 128 MB
Flash: 64 MB
Expansion Flash Memory: microSD socket with one 4 GB microSD card (support up to 16 GB microSDHC card)
LED Indicator: 1 LED for Power and Running
Rotary Switch: Yes (0 ~ 9)
Communication Ports
Ethernet: RJ-45 x 2, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
USB 1.1 (client): 1
USB 1.1 (host): 1
COM 1: RS-232 (RxD, TxD and GND); non-isolated; can connect to SMS Modem (GTM-203M-3GWA)
COM 2: RS-485 (D+, D-); 2500 VDC; isolated
COM 3: RS-485 (D+, D-); 2500 VDC; isolated
Mechanical
Dimensions (W x L x H): 91 mm x 126 mm x 52 mm
Installation: DIN-Rail Mounting
Environmental
Operating Temperature: -25 ~ +75 °C
Storage Temperature: -30 ~ +80 °C
Ambient Relative Humidity: 10 ~ 90% RH (non-condensing)
Power
Input Range: +10 ~ +30 VDC
Isolation: 1 kV
Consumption: 4.8 W (0.2 A @ 24 VDC)