I-5534-M
Industrial 4-port CAN bus Switch with Metal casing
- 4 CAN communication ports
- Compatible with CAN specification 2.0 A and 2.0 B
- Fully compatible with the ISO 11898-2 standard
- Baud rate: 5k, 10k, 20k, 33.3k, 50k, 62.5k, 83.3k, 125k, 250k, 500k, 800k, 1 M bps and customized
- CAN bus filter is configurable
- 100 data frames buffer for esch CAN channel
- Max data flow up to 2500 fps for all CAN channel
- Selectable baud rate by rotary switch
- Selectable 120 Ω terminator resistor by Jumper
- LED for CAN status
The I-5534-M is one kind of CAN bus switch. There are four independent CAN channels which offer a flexible design of the start or tree network topology. This new topology could resolve the complex CAN bus application, like industrial machinery, building automation, vehicle automation, and etc. Furthermore the I-5534-M integrates and exchanges data between different CAN network which has different baud rate. It helps users to extend the CAN network system. The I-5534-M could increase the maximum CAN node count in a CAN network by splitting the CAN network into several subnets. In additional, the user-defined CAN baud rate and CAN filter configuration are also supported.
Hardware
Transceiver: NXP TJA 1042
Channel Number: 4
CAN Specification: ISO-11898-2, CAN 2.0A and CAN 2.0B
CAN Connector: 9-pin male D-Sub with CAN_GND, CAN_SHLD, CAN_H, CAN_L
Baud Rate (bps): 5k, 10k, 20k, 33.3k, 50k, 62.5k, 83.3k, 125k, 250k, 500k, 800k, 1 M bps and customized
Baud Rate Selection: Selectable by rotary switch
Isolation: 3000 Vdc for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor: Selectable 120 Ω terminator resistor by Jumper
Transmission Distance (m): Depend on baud rate (for example, max. 1000 m at 50 kbps)
CAN filter: Configurable by user
UART Interface
RS-232: 1 Port (for configuration)
RS-232 Connector: 3-pin screwed terminal block (TxD, RxD, GND)
LED
Round LED: CAN status LED x 4, Power LED x 1
Power
Input Range: Unregulated +10 VDC~ +30 Vdc
Power Consumption: 2 W
Mechanical
Casing: Aluminum metallic case
Dimensions (W x L x H): 116.5 x 127 x 61.3 mm
Installation: Wall-Mounting
Environment
Operating Temperature: -25 °C ~ +75 °C
Storage Temperature: -30 °C ~ +80 °C
Humidity: 10 ~ 90% RH, non-condensing