PROFI-5050 CR ICP DAS PROFIBUS

The PROFI-5050 is one of the PROFIBUS DP series products produced by ICP DAS. It provides the
PROFIBUS DP communication protocol with any DP-Masters. The PROFI-5050 provides ±4KV
ESD protection contacting for all terminals (include I/O Terminals and PROFIBUS connector). By
applying the PROFI-5050, users can easily establish a PROFIBUS DP network with other
DP-Masters. In advance, it can be used in the application of building automation, remote data
acquisition, environment control and monitoring, laboratory equipment & research, factory
automation, etc..

• Support for PROFIBUS DP-V0 protocol
• Detect transmission rate automatically(Max. 12Mbps)
• Address 0~99 set by rotary switches
• Network Isolation Protection
• 3000VDC isolation protection on PROFIBUS side
• 4KV ESD Protection (contact for any terminal).
• Wide range of power input (DC 10~40VDC) and
• operating temperature (-25°C~+75°C) 

HARDWARE SPECIFICATIONS

Hardware
ESD Protection: 4 kV class A
 
PROFIBUS Interface
Controller: Profichip VPCLS2
Transceiver: ADI ADM2486
Connector: 9-pin female D-Sub
Baud Rate (bps): 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Transmission Distance (m): Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
Isolation: 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Protocol: DP-V0
 
LED
Round LED: PWR LED, RUN LED
 
Power
Power supply: Unregulated +10 ~ +40 VDC
Protection: Reverse polarity protection, Over-voltage brown-out protection
Power Consumption: 1 W
 
I/O
Digital Output
8 Channels (Sink), Non-Isolated with common ground
Load Voltage: +10 ~ +30V
Maximum Load Current: 30mA w/o Short-Circuit Protection
 
Digital Input
16 Channels (Sink or Source), Non-Isolated with common ground(or source)
Off Voltage Level: +1V Max. On Voltage Level: +4 ~ +30V
 
Mechanism
Installation: DIN-Rail
Dimensions: 91 mm x 128 mm x 52 mm (W x L x H)
 
Environment
Operating Temp.: -25 ~ 75℃
Storage Temp.: -30 ~ 85℃
Humidity: 5 ~ 95% RH, non-condensing