PROFI-5017C CR ICP DAS Fieldbus Converters

The PROFI-5017C is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 8-channel isolated analog current input with 2500Vrms field to logic isolation. Users can easily to choose and configure it by using the GSD file in any PROFIBUS Configurator.

• Protocol & Hierarchy: DP-V0 Slave
• Supports Transmission Rate (kbps): 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000
• Transmission Rate Setting: detected automatically
• Address Setting: Address 0~126 set by rotary switches or SSA Telegram
• Indicators: PWR LED, RUN LED, ERR LED
• I/O modules Configuration: Configured by GSD file
• Network Isolation Protection: High Speed iCoupler
• DC Isolation Protection: 3000 VDC on PROFIBUS side
• 4KV ESD Protection: Contact for each terminal

HARDWARE SPECIFICATIONS

Hardware
CPU: 80186, 80 MHz or compatible
SRAM/Flash/EEPROM: 512 KB / 512 KB / 2 KB
Watchdog Watchdog: IC, CPU built-in
ESD Protection: 4 kV class A
 
PROFIBUS Interface
Controller: Siemens SPC3
Transceiver: ADI ADM2486
Connector: 9-pin female D-Sub
Baud Rate (bps): 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Transmission Distance (m): Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
Isolation: 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Protocol: DP-V0
 
UART Interface
COM: RS-232 on board (For updating firmware)Note 1.
 
I/0
Analog Input: 8 channel differential current input, Isolation Voltage:2500Vrms
Input Range: 0 ~ 20mA
Accuracy: +/- 0.2% of FSR
 
LED
Round LED: PWR LED, RUN LED, ERR LED
 
Power
Power supply: Unregulated +10 ~ +40 VDC
Protection: Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption: 3W
 
Mechanism
Installation: DIN-Rail
Dimensions: 91 mm x 128 mm x 52 mm (W x L x H)
 
Environment
Operating Temp.: -25 ~ 75℃
Storage Temp.: -30 ~ 80℃
Humidity: 10~90% RH,non-condens