I-7540D-MTCP CR
CAN to Ethernet / Modbus TCP / Modbus RTU Converter. Supports operating temperatures between -25 to 75°C
- 80186, 80MHz CPU, or compatible
- 10/100 Base-TX Ethernet Controller
- Message transmitted by using TCP/IP protocol
- COM driver support interrupt & 1K QUEUE Input & Output buffer
- Use one RS-232 port, one RS-485 port and one CAN port
- 2500Vrms photo-isolation protection on CAN side.
- Jumper select 120Ω terminator resistor for CAN channel
- NXP 82C250 CAN Transceiver
- Support both CAN specification 2.0A and 2.0B.
- Max transmission speed up to 1M bps for CAN and 115.2kbps for RS-232 & RS-485
- Max transmission distance of CAN over 1000m (follow CAN specification)
- 7-segment LED display.
- Software configuration CAN and RS-232 communication parameters
- Firmware updated from COM1 or Ethernet port
- Web Configuration
- Provide maximum 25 Ethernet clients connection
- Support for Virtual COM technology
Intelligent CAN to Modbus TCP/RTU Converter I-7540D-MTCP The I-7540D-MTCP by ICP DAS is a solution that enables CAN networks to be integrated into the Internet/Ethernet or Modbus TCP/RTU, whereby remote monitor and control is possible.
The I-7540D-MTCP controls networked communication and makes a transparent CAN-based application interface available to the user. Thus it allows to be implemented into a various applications.
CAN Interface
Controller: NXP SJA1000T with 16 MHz clock
Transceiver: NXP 82C250
Channel number: 1
Connector: 2-pin screwed terminal block (CAN_L, CAN_H)
Baud Rate (bps): 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate)
Isolation: 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor: Jumper for 120 Ω terminator resistor
Specification: ISO-11898-2, CAN 2.0A and CAN 2.0B
UART Interface
COM 1: RS-232
COM 1 Connector: 5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND )
COM 2: RS-485 (Self-turner inside)
COM 2 Connector: 2-pin screwed terminal block (DATA+, DATA-)
Baud Rate (bps): 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Data bit: 7, 8
Stop bit: 1
Parity: None, Even, Odd
Ethernet Interface
Controller: 10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)
Connector: RJ-45 with LED indicator
Power
Power supply: Unregulated +10 ~ +30 VDC
Protection: Power reverse polarity protection, Over-voltage brown-out protection
Power Consumption: 2.5 W
Mechanism
Installation: DIN-Rail
Dimensions: 72mm x 122mm x 33mm (W x L x H)
Environment
Operating Temp: -25 ~ 75 ℃
Storage Temp: -30 ~ 80 ℃
Humidity: 10 ~ 90% RH, non-condensing