PISO-CM100U-T
Intelligent CAN interface with one Isolated Protection CAN Communication Port and 5-Pin Screw Terminal Connector for Universal PCI bus systems.
- Microprocessor inside with 80186, 80MHz
- 82C250 CAN transceiver
- SJA1000T CAN controller
- Fully compatible with ISO 11898-2 standard
- Support both CAN 2.0A and CAN 2.0B
- Timestamp with at least ±1ms precision
- DIP switch to select board number
- Dual port RAM communication mechanism
- RTC (real time clock) inside
The PISO-CM100U represents a very powerful and economic solution of an active CAN board with one CAN channel, covering a wide range of CAN applications. The 16-bit on-board microcontroller allows, among many other features, the filtering, preprocessing, and storage (with timestamp) of CAN messages as well as the real-time transmission of CAN messages. Under the effect of the powerful microcontroller, this card can be made for one CAN controller without losing data, even in systems with a high bus load. In addition, users can develop their own CAN application by using the PISO-CM100U library. When the PISO-CM100U is active, the data exchange between users’ application and CAN bus firmware is performed via the memory mapping method of the PISO-CM100U.
Hardware
CPU: 80186, 80 MHz or compatible
SRAM/Flash/EEPROM: 512 KB / 512 KB / 16 KB
DPRAM: 8 KB
NVRAM: 31 bytes (battery backup, data valid for up to 10 years)
RTC (Real Time Clock): Yes
Bus Interface
Type: Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, plug and play
Board No. By DIP switch
CAN Interface
Controller: NXP SJA1000T with 16 MHz clock
Transceiver: NXP 82C250
Channel number: 1
Connector: 5-pin screwed terminal block
Baud Rate (bps): 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M (allow user-defined baud rate)
Isolation: 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminator Resistor: Jumper for 120 Ω terminator resistor
LED
Round LED Rx/Tx LED, ERR LED
Software
Driver: Windows 2K/XP/7(X32)
Library: VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0
Power
Power Consumption: 300 mA @ 5 V
Mechanism
Dimensions: 138mm x 22mm x 105mm (W x L x H)
Environment
Operating Temp: 0 ~ 60 °C
Storage Temp: -20 ~ 70 °C
Humidity: 5 ~ 85% RH, non-condensing