WISE-7902D ICP DAS new

• Built-in Web Server for IF-THEN-ELSE rule setting
• Built-in IF-THEN-ELSE rule enigne for logic operation
• No more programming. Click and get done!
• Support I/O, Counter, Timer, Email, Recipe operations
• Modbus TCP Protocol for SCADA Software Seamless
• Integration
• IEEE 802.3af-compliant Power over Ethernet (PoE)
• 10/100 Base-TX Ethernet
• Support FRnet Modules: FR-2053T, FR-2054T, FR-2057T

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development. WISE-7902 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7902 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc. This module WISE-7902 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It supports an I/O expansion bus to implement various I/O functions such as D/I and D/O according to the using FRnet modules: FR-2053T, FR-2054T, and FR-2057T.

System

CPU: 16-bit CPU
SRAM: 512KB
Flash Memory: 512KB
EEPROM: 16KB
NVRAM: 31 Bytes
OS MiniOS7
RTC (Real Time Clock): Provide second, minute, hour, date of week, month and year
64-bit Hardware Serial Number: Yes
Watchdog: Yes

Communication

Ethernet RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
COM 1: No (Unsupported by WISE firmware)
COM 2: No (Unsupported by WISE firmware)
FRnet: Max. 1M

LED Indicators

System LED: Yes (Red)
LED Display: 5-digit 7-segment LED display
Special Indicator PoE LED (Green)

Mechanical

Dimensions (W x H x D): 72 mm x 123 mm x 35 mm
Installation: DIN-Rail or Wall Mounting

Environmental

Operating Temperature: -25 °C ~ +75 °C
Storage Temperature: -40 °C ~ +80 °C
Humidity: 5 ~ 90% RH, non-condensing

Power

Protection Power Reverse Polarity: Protection
Frame Ground: Yes (for ESD Protection)
Input Range: 12 ~ 48 VDC
Power over Ethernet (PoE) IEEE 802.3af Class 1
Power Consumption: 2.5 W

Functions

Rule Configuration Website: Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules: 
      3 IF conditions with AND or OR operators
      3 THEN actions and 3 ELSE actions
48 Internal Registers: Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers: Delay / Timing functions.
12 Schedules: Setup prescheduled routine tasks.
12 Emails: Send Email messages to pre-set Email receivers.
12 CGI Commands: Send pre-set CGI commands.
12 Recipes: Set up THEN/ELSE action groups.
8 P2P remote modules: Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol: Real time control and monitoring I/O channels and system status of controllers via SCADA software.

IF Conditions

DI Channel: ON、OFF、ON to OFF、OFF to ON、Change
Internal Register: =、>、<、>=、<=(value)
DI Counter - DO Counter: =、>、<、>=、<=(value)、Change
Timer: Timeout、Not Timeout
Schedule: In Range、Out of Range
P2P: DI、AI、DI counter、DO counter、IR
Rule Status: Enable、Disable

THEN / ELSE Actions

DO Channel: ON、OFF、Pulse Output
Internal Register: Change the value
DI Counter - DO Counter: Reset
Timer - Schedule: Start、Stop
Email - CGI Commands: Send
Recipe: Execute
P2P: DO(On/Off)、AO、IR
Rule Status: Enable、Disable