I-8KE4-MTCP-G
Ethernet I/O unit Remote Ethernet I/O expansion unit, 20W power, 4 I/O slot, one Ethernet port, Modbus/TCP software
- Supports IPv4
- Supports Modbus/TCP communication protocol at Ethernet port.
- Supports Modbus/RTU communication protocol at RS-232 port.
- Supports 8K and 87K series DI/DO/AI/AO/Counter/Frequency modules
- I/O configurable via the Ethernet (Using the Modbus Utility)
- I/O scan engine
- The engine can automatically scan I/O modules plug in slots and range I/O registers address to continuous.
- To have high-data-density registers to get best communication efficiency.
- Support power on value and safe value for analog/digital output module
- Detection of I/O module communication status (online/offline).
- The SMMI of the panel can be used to
- Configure the network setting (IP, Mask, Gateway)
- Set the offset value of AI/AO module
- Allowed a maximum of 8 host PCs access simultaneously
- Firmware updateable (via the RS-232 port)
- Firmware programmable
- We provide the Modbus SDK allowing users customized the Modbus firmware.
I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.. Most SCADA software support Modbus communication protocol, thus users can easily and quickly integrate remote I/Os to the SCADA software as data acquisition and monitor to apply to environment monitoring, power management, factory automation, etc.
CPU module
CPU: 80186-80 or compatible (16-bit and 80MHz)
SRAM: 512KBytes
Flash: 512KBytes
EEPROM: 2KBytes
Built-in Watchdog Timer: Yes
Communicate Interface
COM 0: Internal communication with the 87K modules
COM 1: RS-232 (to update firmware)
Ethernet Port
10BaseT NE2000 compatible
SMMI
5 - Digit LED Display: Yes
3 - Programmable LED Indicators: Yes
4 - Push Buttons: Yes
I/O expansion slots
I-8KE4-MTCP: 4 Slots
I-8KE8-MTCP: 8 Slots
Dimensions
I-8KE4-MTCP: 230mm x 110mm x 75.5mm
I-8KE8-MTCP: 354mm x 110mm x 75.5mm
Operating Environment
Operating Temperature: -25°C to +75°C
Storage Temperature: -30°C to +85°C
Humidity: 5 ~ 95%,non-condensing
Power
Protection: Power reverse polarity protection
3KV power isolation: Yes
Power requirement: 10 ~ 30 V/DC
Power supply: 20W
Power consumption:
I-8KE4-MTCP: 3.9 W
I-8KE8-MTCP: 5.1 W