I-8831-80-MTCP-G ICP DAS new

• Supports Modbus/RTU to Modbus/TCP converter.
• I-8000E -MTCP's COM Port can be setted as gateway mode, and connect to Modbus/RTU device. Host PC can link
• the Modbus/RTU device by Modbus/TCP protocol with enthernet.
• Supports VxComm technique for every COM port of controllers.
• When the serial device does not support Ethernet, user still can use virtual COM Port to access the device by
• Ethernet . Just set I-8000E -MTCP's COM Port as VxComm mode, and install VxComm driver on PC, then mapping
• a virtual COM Port to I-8000E -MTCP's COM Port. After all, user's program can communicate with serial COM Port
  
• remote device by standard RS-232 process.
• Supports 8K and 87K DI/DO/AI/AO modules.
• Refer to Modbus Utility on line help
• Automatically scan I/O modules and range I/O registers address to continuous.
• You can plug I/O modules in any slot. The Modbus firmware can automatically scan all slots and range I/Os to
• registers in continuous.You can use Modbus Utility to see the I/O address mapping.
• Support power on value and safe value for analog/digital output module
• Refer to Modbus Utility on line help
• Allowed several host PCs( client ) access simultaneously.
• It depends on how many serial ports on the 7188E/8000E and how many serial ports of 7188E/8000E that each PC
• connected on it. See FAQ for detail, http://www.icpdas.com/faq/7188e/hardware/003.htm
• Firmware modifiable
• We provide the Modbus SDK allowing users to develop their custom Modbus firmware.

I-800E-MTCP are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.. Most SCADA software support Modbus communication protocol, thus users can easily and quickly integrate remote I/Os to the SCADA software as data acquisition and monitor to apply to environment monitoring, power management, factory automation, etc.

CPU module

CPU: 
     80188 or compatible (8-bit and 40MHz) / I-8431-MTCP/I-8831-MTCP
     80186 or compatible (16-bit and 80MHz) / I-8431-80-MTCP/I-8831-80-MTCP
SRAM: 512KBytes
Flash: 512KBytes
EEPROM: 2KBytes
NVRAM: 31Bytes
RTC (real time clock): Yes
Hardware Serial Number: Yes
Built-in Watchdog Timer: Yes

Communicate Interface

COM 0: Internal communication with the 87K modules
COM 1: RS-232 (to update firmwarer
COM 3: RS-232/RS-485
COM 4: RS-232
Ethernet Port: 10BaseT NE2000 compatible

SMMI

5 - Digit LED Display: Yes
3 - Programmable LED Indicators: Yes
4 - Push Buttons: Yes

I/O expansion slots

8431-MTCP: 4 Slots
8831-MTCP: 8 Slots
8431-80-MTCP: 4 Slots
8831-80-MTCP: 8 Slots

Dimensions

8431-MTCP/8431-80-MTCP: 230 x 110 x 75.5 mm
8831-MTCP/8831-80-MTCP: 354 x 110 x 75.5 mm

Operating Environment

Operating Temperature: -25°C to +75°C
Storage Temperature: -30°C to +85°C
Humidity: 5 ~ 95%,non-condensing

Power

Protection: Pow€er reverse polarity protection
3KV power isolation: Yes
Power requirement: 10 ~ 30 V/DC
Power supply: 20W
Power consumption: 
          I-8431-MTCP: 3.9 W
          I-8831-MTCP: 5.1 w