I-8810
Embedded Controller with 5-digit seven segment Display, developing tool kit, 512 k flash, 128K SRAM, 8 slot I/O
- Supports the RS-232 or RS-485 communication interface.
- Supports DCON communication protocol.
- Dual Bus designed to supports I-8K and I-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency modules.
- Compact I/O Expansion slot allows the quick installation of arious 8K and 87K I/O modules.
INTRODUCTION
The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc.
The CPU is a 8-bit 80188 (40MHz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm or light.
Various software development kits (SDK) and demos are provided, such as DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc. The I/O modules can be easily added to the I-8410/I-8810 and can be quickly integrated into an existing system.
SPECIFICATIONS
CPU module
CPU: 80188 or compatible (8-bit and 40MHz)
SRAM: 256 KBytes
Flash: 256 KBytes
EEPROM: 2 KBytes
NVRAM: –
RTC (real time clock): –
Hardware Serial Number: –
Built-in Watchdog Timer: Yes
Communicate Interface
COM 0: Internal communication with the 87K modules
COM 1: RS-232 (to update firmware)
COM 2: RS-485
COM 3: RS-232/RS-485
COM 4: –
Ethernet Port: –
SMMI
5 - Digit LED Display: Yes
3 - Programmable LED Indicators: Yes
4 - Push Buttons: Yes
I/O expansion slots
Slot Number: 8 Slots
Mechanical
Dimensions: 354 mm x 110 mm x 75.5 mm
Environmental
Operating Temperature: -25 °C ~ +75 °C
Storage Temperature: -30 °C ~ +85 °C
Humidity: 5 ~ 95%,non-condensing
Power
Protection: Power reverse polarity protection
3 KV power isolation: –
Power requirement: 10 ~ 30 VDC
Power supply: 20 W
Power consumption: 5.1 W