CAN-2053
CCON module of 16-channel Isolated Sink/Source Digital Input
CCON protocol is one of the application layer protocol on the CAN bus. It was developed by the ICP DAS Co., LTD.
CCON protocol is a simple and effective protocol for industrial automation applications. Based on the CAN bus layer, it could provide many safe and robust communication mechanisms like arbitration, error detection, error correction and etc. It could help to establish the CAN networking application fast and easily. The CCON I/O modules could reply their own real-time I/O information to the controller at regular intervals automatically. In other word, the controller could acquire all remote modules in short time. It makes the communication more efficient when collecting a lot of remote I/O information.
CAN-2053 module is easy to access the digital input status and set the configuration by using standard CCON protocol. CAN-2053 has 16-channel isolated sink/source digital input, and it can be used to various applications, such as PNP, NPN, TTL, relay contact and so forth. By owing to the CCON masters of ICP DAS, you can quickly build a CCON network to approach your requirements.
CAN-2053: CCON module of 16-channel Isolated Sink/Source Digital Input
CAN Interface
Connector: 5-pin screwed terminal block (CAN_GND, CAN_L, CAN_SHLD, CAN_H, CAN_V+)
Baud Rate (bps): 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 M
Terminator Resistor: Switch for 120 Ω terminator resistor
Node ID: 1~99 selected by rotary switch
Protocol: CCON ver2.00
Digital Input
Channels: 16 (Sink/Source)
ON Voltage Level: +3.5~+30VDC
OFF Voltage Level: +1VDC Max.
Input Impedance: 3kΩ 0.3W
Intra-module Isolation: 3750Vrrns
ESD Protection: 4kV contact for each channel
Reaction Time: 200 us
LED
Round LED: PWR LED, RUN LED, ERR LED
Terminal Resister: 1 LED as terminal resister indicators
DI LED: 16 LEDs as digital input indicators
Power
Input range: Unregulated +10 ~ +30 VDC
Power Consumption: 1.5 W
Mechanism
Installation: DIN-Rail
Dimensions: 32.3 mm x 99 mm x 77.5 mm (W x L x H) Detail
Environment
Operating Temp.: -25 ~ +75 ℃
Storage Temp.: -30 ~ +80 ℃
Humidity: 10 ~ 90% RH, non-condensing