Benvenuti sulla nostra nuova piattaforma ICP DAS
Che sostituisce industrialtech.it

M-7088-G CR ICP DAS DCON Modbus

M-7088-G CR ICP DAS

M-7088-G CR

8-ch PWM Output and 8-ch High-speed Counter Input Module (5 VDC) using DCON and Modbus Protocols (Gray Cover)

Quantity:

Price

€ 230,97

(VAT excluded)

€ 281,78(VAT included)

Prezzo di 1 pz. iva (22%) inclusa: € 281,78

Availability: 10 business days

SKU: 106287

Model: M-7088-G CR

Need Help?


The I-7088 provides 8-channel PWM (Pulse Width Modulation) Output and 8-channel Counter Input, and can be used to develop powerful and cost-effective analog control systems. PWM is a powerful technique for controlling analog circuits that uses the Digital Output to generate a waveform with a variable duty cycle and frequency which can then be used to control an analog circuit in applications such as controlling the position or speed of motors, the brightness of lamps, or the speed of fans, etc. Either burst mode or continuous mode can be used for the PWM output depending on the application. In addition, all Digital Input channels can be used as high-speed counters with a speed of up to 1 MHz. The M-7088 supports both the Modbus RTU and the DCON protocols, which can be confi gured via software, and all hardware specifi cations are the same as the I-7088. The I-7088(D)/S and M-7088(D)/S allows the load voltage to be increased from +3.5 to +50 V for the 8-channels PWM (Pulse Width Modulation) output and the 8-channels high-speed counter.
M-7088-G CR: 8-channel PWM Output and 8-channel High-speed Counter Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)

  • 8-channel PWM Output and 8-channel Counter Input
  • Burst Mode and Continuous Mode for PWM Output
  • Software and Hardware Trigger Mode for PWM Output
  • Individual and Synchronous PWM Output
  • High-speed Counters
  • 4 kV ESD and EFT Protection
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 to + 75°C

Counter Input

Channels: 8
Contact: Wet
Sink/Source (NPN/PNP): Sink
On Voltage Level: +3.5 ~ +5 VDC
Off Voltage Level: +1 VDC Max.
Programmable Filter: --
Programmable Threshold Voltage: --
Counter Bits: 32-bit
Counter Mode: Up
Encoder Mode: --
Frequency Mode: -- 
Virtual Battery Backup: Yes 
Frequency Accuracy: --
Max. Speed: 1 MHz 

PWM Output

Channels: 8
Type: PWM, TTL
Sink/Source (NPN/PNP): Sink
Load Voltage: +5 VDC
Max. Load Current: Sink = +5 VDC @ 10 mA/Channel / Source = +5 VDC @ 1 mA/Channel
PWM:

  • Frequency: 1 Hz ~ 500 KHz
  • Duty Cycle: 0.1 to 99.9%
  • Mode: Burst, Continuous
  • Burst Count: 1 to 65535
  • Trigger Start: Hardware or Software

Power-on Value: --
Safe Value: --  

Communication

Interface: RS-485 
Bias Resistor: No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format: (N,8,1)(N,8,2)(E,8,1)(O,8,1)
Baud Rate: 1200 to 115200 bps
Protocol: Modbus RTU, DCON
Dual Watchdog: Yes, Module (1.6 Seconds), Communication (Programmable)

LED Indicator/Display

System LED Indicator: Yes, 1 as Power/Communication Indicator
I/O LED Indicator: 7-Segment
7-Segment LED Display: -- 

Isolation

Intra-Module Isolation, Field-to-Logic: 2500 VDC 

EMS Protection

ESD (IEC 61000-4-2): ±4 kV Contact for each Terminal
EFT (IEC 61000-4-4): ±4 kV for Power Line
Surge (IEC 61000-4-5): --  

Power

Reverse Polarity Protection: Yes
Format: +10 ~ +30 VDC 
Baud Rate: 2.9 W 

Mechanical

Dimensions (L x W x H): 123 mm x 72 mm x 35 mm
Installation: DIN-Rail or Wall Mounting 

Environment

Operating Temp.: -25 to +75°C
Storage Temp.: -40 to +85°C
Humidity: 10 to 95% RH, non-condensing

Disclaimer